BSMTB - 626 DUNCAN STONEWARE DRY BODY SW500
- MSDS: BSMTB
- Manufacturer: DUNCAN ENTERPRISES
- Product Name: 626 DUNCAN STONEWARE DRY BODY SW500
- National Stock Number: 8010-00F031167
Product Identification
Product ID:626 DUNCAN STONEWARE DRY BODY SW500
MSDS Date:04/01/1992
FSC:8010
NIIN:00F031167
MSDS Number: BSMTB
Responsible Party
FRESNO, CA 93727-7819
US
Emergency Phone: 209-445-1222/303-623-4884
Info Phone: 209-291-4444
Preparer: CURT SATHRE
Cage: 21546
Contractor
Telephone: 209-291-4444
Cage: 21546
Ingredients
SILICA DIOXIDE, CRYSTALLINE QUARTZ, SAND (SUSPECTED HUMAN
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: <50%
OSHA PEL 0.19 MG/CUM
ACGIH TLV: 0.1 MG/CUM RESP DUST
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION & SENSITIZATION.
INHALATION: UPPER RESPIRATORY SYSTEM IRRITATION. EYES: IRRITATION.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:INHALATION: CONGESTION. EYES: BURNING
SENSATION, INFLAMMATION.
First Aid
First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MINS. SKIN: WASH W/SOAP &
WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Fire Fighting Procedures:WILL NOT BURN.
Accidental Release
Spill Release Procedures:CLEAN UP PROPERLY W/PAPER TOWELS & WET SPONGE.
Handling
Handling and Storage Precautions:KEEP CONTAINER SEALED.
Exposure Controls
Respiratory Protection:IF SPRAYING, DON'T INHALE MIST. USE NIOSH
APPROVED RESPIRATOR FOR SPRAYS/MISTS.
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECHANICAL (GENERAL):
RECOMMENDED WHEN SPRAYING.
Eye Protection:REQUIRED
Work Hygienic Practices:GOOD HYGIENE PRACTICES SHOULD BE FOLLOWED.
Supplemental Safety and Health
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:>3000F
Spec Gravity:>1
Appearance and Odor:CREAM COLORED POWDER
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:PUT PAPER TOWELS IN TRASH & RINSE OUT SPONGE.
DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.